Novatech Bitronics M87X Series Manual page 164

Figure A 11
The IED Configurator makes it relatively simple to configure subscriptions when the
7.
MCL files for all devices are open at the same time and the GOOSE publications have
already been configured on each of the other devices. See Figure A12. By clicking on
the Browse button, a window appears allowing the user to select the status point (green
dot shown in Figure A12). Selecting the point (Records/WrxRDRE1.ST.RcdStr.stVal)
causes a subscription to be configured for the GOOSE message that contains that
status point. After selecting that point, next click on System\GosGGIO1\Ind2.stVal
(see left side of Figure A11) and repeat step 7 selecting the same status point from the
second M871 for the second subscription, and again with
System\GosGGIO1\Ind3.stVal for the third subscription, etc. until a subscription has
been made to each of the other IEDs on the network.
148
ML0021 August 15, 2018 Copyright 2018 Bitronics, LLC