Appendix B - Firmware Version History - Novatech Bitronics M87X Series Manual

APPENDIX B - FIRMWARE VERSION HISTORY

v1.11 New feature additions include user selection of measurements for the Trend
Recorder, user selection of overwrite mode for file storage, and user
selection of binary or ASCII Comtrade formats.
Firmware changes have been made to correct a time set error encountered
during
configuration in UCA has also been changed to correct a problem discovered
in earlier versions.
v1.12 Fixed update of digital outputs via DNP
v1.13 New product release adds event system, sequence of events, UCA GOOSE,
and support for the P31 Digital Input/Output module.
v1.14-1.17 Maintenance Upgrades.
v1.18 Initial Firmware release for H11 host module. Support added for DNP event
reporting.
v1.19 Maintenance Upgrades
v1.20 Add support for H11 host module and enable configurable measurement
names.
V1.21 Add auto-blanking for extremely low-level measurement readings
v1.22-1.23 Maintenance Upgrades.
v1.24 Added support for multiple Digital I/O cards.
Triggers.
v1.25-1.26 Maintenance upgrade
v1.27 Added Measurements – Real & Reactive & Impedance for each phase.
Added Telenet protocol. Added DNP analog events & DNP frozen counters.
State of Time sync is now in database, viewable from Modbus, DNP, and
Display protocols and can trigger recorders.
Various maintenance upgrades
v1.28-1.29 Maintenance upgrades.
ML0021
daylight savings
August 15, 2018
time. The Select-Before-Operate
154
Supports Rate of change
Copyright 2018 Bitronics, LLC
(SBO)