10.3 Specifications
Inputs:
8 bi-directional, jumper selectable for voltage or current range. Input
terminals have internal transorb clamp and 90V spark gap protection.
0 – 10V Voltage Range
Overload Range:
Resolution:
Input Resistance:
0 – 1mA Current Range
Overload Range:
Resolution:
Input Resistance:
4 – 20mA Current Range
Overload Range:
Resolution:
Input Resistance:
Common Mode Input Range
Common Mode Error
Vcm DC:
Vcm 50/60Hz AC:
Accuracy
Data Update Rate (poll rate):
Input Capacitance, any Terminal to Case:
Power Supply Requirements:
Hot Swap:
10.4 Environmental
Operating Temperature:
Relative Humidity:
Installation Category:
ML0021
-12.5 V to +12.5 Vdc
0.381 mV
10KΩ
-2.5 mA to +2.5 mA
0.0763 μA
500Ω
0 mA to +25 mA
0.381 μA
50Ω
+/- 9V, Input to Chassis
0.3% of FS @ 9Vp Common Mode
0.1% of FS @ 9Vp Common Mode
0.25% of Full Scale Input
100 ms minimum (single P40 Transducer input module)
500 ms minimum (multiple P40 Transducer input
modules)
3.3Vdc, 5Vdc, +/-12Vdc (supplied from backplane)
Complies with Hot Swap specification PICMG 2.1 R1.0
for Basic Hot Swap (requires Host Processor re-boot)
-40C to 70C
0-95% non-condensing
IC III (Distribution Level), Pollution Degree 2. Refer to
definition on page 9.
August 15, 2018
470pF
133
Copyright 2018 Bitronics, LLC