Novatech Bitronics M87X Series Manual page 24

Inputs
0 – 10V Voltage Range
0 – 1mA Current Range
4 – 20mA Current Range
Common Mode Input Range
Common Mode Error
Accuracy
Protection
Data Update Rate (Poll Rate)
Input / Output Capacitance, any
Terminal to Case
Power Supply Requirements
Hot Swap
Connections
Package
(Refer to Section 10 on -P40 Tranducer input Module)
ML0021
-P40 Transducer Input Module
8 bi-directional, jumper selectable for voltage or current range.
Overload Range:
Resolution:
Input Resistance:
Overload Range:
Resolution:
Input Resistance:
Overload Range:
Resolution:
Input Resistance:
+/- 9V, Input to Chassis
Vcm DC 0.3% of FS @ 9Vp Common Mode
Vcm 50/60Hz 0.1% of FS @ 9Vp Common Mode
AC
0.25% of Full Scale Input
Input terminals have internal transzorb clamp and 90V spark gap protection.
100ms minimum (single P40 module); 500ms minimum (multiple P40 modules)
470pF
3.3Vdc, 5Vdc, +/-12Vdc (supplied from backplane)
Complies with Hot Swap specification PICMG 2.1 R1.0 for Basic Hot Swap (requires
Host Processor re-boot)
Removable Terminal Blocks, accepts #16-28AWG (1,4-0,09mm) wire. Recommended
Torque Rating is 2.2 In-Lbs, 0.25 N-m. Standard 0.150" (3,81mm) header socket
accepts other standard terminal types. Solid core wire is recommended, or stranded wire
with the use of "bootlace ferrules," where these are available.
CompactPCI TM (3U, 4HP) removable module
August 15, 2018
-12.5 V to +12.5 Vdc
0.381 mV
10KΩ
-2.5 mA to +2.5 mA
0.0763 μA
500Ω
0 mA to +25 mA
0.381 μA
50Ω
8
Copyright 2018 Bitronics, LLC