Icom IC-7200 Instruction Manual page 46

10
OPTIONS
MB-117
CARRYING HANDLE
Convenient when carrying the trans-
ceiver.
OPC-599 ADAPTOR CABLE
13-pin, ACC connector to 7-pin and
8-pin ACC connectors.
IC-PW1/EURO HF/50 MHz ALL BAND 1 kW LINEAR AMPLIFIER
Full-duty 1 kW linear amplifier including an automatic antenna tuner. Has auto-
matic tuning and band selection capability. Full break-in (QSK) operation is pos-
sible. The amplifier/power supply unit and the remote control unit are separated.
An optional OPC-599 is required for connection.
41
MB-118
MOBILE MOUNTING BRACKET
For mounting the transceiver in a ve-
hicle.
AH-710 FOLDED DIPOLE
ANTENNA
Covers all bands from 1.9 to 30 MHz.
Has an SO-239 connector. 30 m (98.4
ft) coaxial cable with PL-259 connector
is supplied.
OPC-598 ACC 13-PIN CABLE
Required when using the AT-180 .
• 7 m (22 ft)
RS-BA1 IP REMOTE CONTROL
SOFTWARE
To remotely control radios using the
RS-BA1, BE SURE that you comply
with your local regulations.
Approved Icom optional equipment
is designed for optimal performance
when used with an Icom transceiver.
Icom is not responsible for the destruc-
tion or damage to an Icom transceiver
in the event the Icom transceiver is
used with equipment that is not manu-
factured or approved by Icom.