About The Supplied Cd - Icom IC-7200 Instruction Manual

PRECAUTIONS (CONTINUED)
During mobile operation, NEVER place the transceiver
where air bag deployment may be obstructed.
During mobile operation, DO NOT place the transceiv-
er where hot or cold air blows directly onto it.
During mobile operation, DO NOT operate the transceiv-
er without running the vehicle's engine. When the trans-
ceiver's power is ON and your vehicle's engine is OFF,
the vehicle's battery will quickly become exhausted.
Make sure the transceiver power is OFF before start-
ing the vehicle engine. This will avoid possible damage
to the transceiver by ignition voltage spikes.
Turn OFF the transceiver's power and/or disconnect
the DC power cable when you will not use the trans-
ceiver for long period of time.

ABOUT THE SUPPLIED CD

The following Instructions, Installers and Schematic
diagrams are included in the CD.
• Instruction manual
Instructions for the basic operation, the same as this
manual
• Advanced Instructions
Instructions for the advanced operations and more
details are described than in this manual.
• HAM radio Terms
The glossary of HAM radio terms
• Schematic Diagrams
The Block diagram and schematic diagrams.
• Adobe
® ®
Reader
Installer for Adobe
To read the guide or instructions, Adobe
required. If you have not installed it, please install the
® ®
Adobe Reader in the CD or downloaded it from Adobe
Systems Incorporated's website.
A PC with the following Operating System is required.
• Microsoft
®
Windows
®
Microsoft Windows
iii
Installer
® ®
Reader
®
Reader
® ®
7, Microsoft Windows Vista
®
XP
D Starting the CD
q
Insert the CD into the CD drive.
• The Menu screen shown below is automatically dis-
played. If it doesn't appear, double click "Autorun.exe"
in the CD.
w
Click the desired button to open the file.
• To close the Menu screen, click [Quit].
®
is
®
or