Icom IC-7200 Instruction Manual page 32

6
SET MODE
■
Items in the Set mode (Continued)
Item
SPEECH LEVEL
SPEECH
LANGUAGE
SPEECH SPEED
SPEECH S-LEVEL
SPEECH [MODE]
KEY
SCAN SPEED
SCAN RESUME
MAIN DIAL AUTO
TS
1 ⁄
DIAL
4
MIC UP/DOWN
SPEED
SSB/CW
SYNCHRONOUS
TUNING
CW NORMAL SIDE
BREAK-IN
BREAK-IN DELAY
DOT/DASH RATIO
PADDLE POLARITY n (Normal) or r (Reverse)
KEYER TYPE
MIC UP/DOWN
KEYER
MODE SELECT
(SSB)
MODE SELECT
(CW)
MODE SELECT
(RTTY)
MODE SELECT (AM) on or oF
CI-V BAUD RATE
CI-V ADDRESS
CI-V TRANSCEIVE
REFERENCE
FREQUENCY
ADJUSTMENT
27
Range or Value
(Default is shown in bold)
0 ~ 50 ~ 100%, in 1% steps
En (English) or JP (Japanese)
HI (faster) or Lo (slower)
on or oF
on or oF
HI (faster) or Lo (slower)
on or oF
HI (Fastest), Lo (Faster) or oF (OFF)
on or oF
HI (faster) or Lo (slower)
on or oF
L (LSB) or U (USB)
oF (OFF), SE (Semi) or FL (Full)
0.2 ~ 7.5 ~ 13.0 (dots), in 0.1 dots
steps
1:1:2.8 ~ 1:1:3.0 ~ 1:1:4.5, in 0.1 unit
steps
EL (ELEC-KEY), bG (BUG-KEY) or
St (Straight key)
on or oF
on or oF
on or oF
on or oF
300, 1200, 4800, 9600, 19200 bps or
Auto
01h ~ 76h ~ 7Fh
on or oF
0 ~ 100%, in 1% steps
( Default setting is different for each
transceiver.)
Descriptions
Sets the volume level of the speech func-
tion.
Selects English or Japanese as the lan-
guage of the speech function.
Selects the speech speed.
Turns the S-Level Speech announcement
function ON or OFF.
Turns the Speech [MODE] key function
ON or OFF.
Sets the rate at which channels or fre-
quencies are scanned during scanning.
Turns the Scan resume function ON or
OFF.
Set the Main Dial automatic tuning speed
when rotating [DIAL] rapidly.
Turn the ¼-speed tuning function ON or OFF
in the CW, RTTY and SSB data modes.
Sets the rate at which frequencies are
scanned when the microphone [UP]/[DN]
keys are held down.
Turns the displayed frequency shift func-
tion ON or OFF.
Select the carrier point of CW mode be-
tween LSB and USB.
Selects the CW break-in type.
Sets the break-in delay time for CW semi
break-in operation.
Sets the internal electronic keyer dot/
dash ratio.
Sets the paddle polarity.
Selects the keyer type for the [KEY] con-
nector on the rear panel.
Sets the activation of the microphone
[UP]/[DN] switches as a paddle.
Turns the SSB (LSB/USB) mode selec-
tion ON or OFF.
Turns the CW/CW-R mode selection ON
or OFF.
Turns the RTTY/RTTY-R mode selection
ON or OFF.
Turns the AM mode selection ON or OFF.
Sets the CI-V data transfer rate.
Sets the CI-V address.
Turn the CI-V "Transceive" function ON or
OFF.
Adjusts the internal reference signal fre-
quency.
Refer
p. 31
p. 32
p. 33
p. 34