D Selecting 'Khz' Step; D Selecting The 1 Hz And 10 Hz Tuning Steps - Icom IC-7200 Instruction Manual

3
OPERATION
D
Selecting 'kHz' step
When the Quick tuning function is selected, the fre-
quency can be changed in the selected 'kHz' steps.
• 0.1, 1, 5, 9 or 10 kHz are selectable.
D
Selecting the 1 Hz and 10 Hz tuning steps
When the Quick tuning step icon, "
tating [DIAL] changes the frequency in increments of
1 or 10 Hz.
NOTE: The frequency is changed in 50 Hz steps
when the [UP]/[DN] switches of the microphone
are used for the frequency setting (when the Quick
tuning step is not selected, "
15
NB NR ANF
METER
V/M 1 A/B 2 3
SPLIT
= 3.5
1.8 7
4 5 6
MW M-CL AGC
10 14 18
7
8 9
COMP SCAN VOX
21 24 28
.
MODE TS 0
F-INP ENT
RIT MNF
GENE 50
BAND
TUNER FILTER P.AMP
ATT
M-CH/RIT
SPCH
SET
[DIAL]
Z, " disappears, ro-
Z " disappears.)
ANF
NB NR
METER
1 2 3
V/M A/B
SPLIT
1.8 = 3.5 7
4 5 6
MW M-CL AGC
10 14 18
7 8 9
COMP SCAN VOX
21 24 28
.
MODE TS
0 F-INP ENT
RIT MNF
GENE 50
BAND
TUNER FILTER
P.AMP
ATT
M-CH/RIT
SPCH
SET
[DIAL]
to turn ON the Quick tuning function.
q
Push
TS
• "Z" appears.
Appears
w
Hold down for 1 second to enter the tuning
TS
step Set mode.
e
Rotate [DIAL] to select the desired tuning step of
0.1, 1, 5, 9 or 10 kHz.
r Push
to exit the tuning step Set mode.
TS
t Rotate [DIAL] to change the frequency according
to the set tuning step.
to turn OFF the Quick tuning function.
y Push
TS
• "Z" disappears.
➥
Hold down TS for 1 second to toggle between the
1 Hz and 10 Hz step settings.
• When the 1 Hz step is selected, the 1 Hz digit appears in
the frequency display; when the 10 Hz step is selected, the
1 Hz digit disappears from the frequency display.
• Rotating [DIAL] changes the frequency in 1 Hz or 10 Hz
tuning step.
10 Hz tuning
Rotating [DIAL] changes the
frequency in 10 Hz steps.
1 Hz tuning
Appears
Rotating [DIAL] changes the
frequency in 1 Hz steps.
Hold down
TS
for 1 second