Driftwood Kit Mf28Dwk - Valor MADRONA MF28JN Installation Manual

Installation

Driftwood Kit MF28DWK

Material required
• Driftwood Kit containing:
• 1 ceramic platform
• 5 logs
• 6 pebbles
• Gloves, if desired (not included)
Installation
Unpack the ceramic logs very carefully to avoid
damaging their fragile material. Install the logs as
shown below. Please note that the position of the logs
is critical to ensure the good performance of the
appliance.
Platform
Insert the platform sideways into the firebox and place
it on top of the burner.
Logs
1. Identify the base log and place it in the cavity of the
ceramic platform. The protruding parts of the log in
front should rest against the lip of the sheet metal
log support behind the burner.
2. Identify the rear log and place it on top of the base
log locating it into the notches on top of the log. Pull
the log forward so it is locked in position.
Fuel Beds
23