Table of Contents
Advertisement
System shutdown
Turn off computer
Firstly, close the VisualEyes™ software by returning to the main screen and selecting the Exit button. Close
the OtoAccess® Database software. Shut down the computer using Start > Shut down.
Turn off stimulus
Turn off the TV/projector.
Turn off accessories
If the Orion Reclining Chair or Nydiag 200 Reclining Chair is used, turn off the power switch in the base of
IMU off if applicable. If the System 2000 chair is used, turn off the power to
the chair. Turn the VORTEQ
TM
the chair controller using the power switch on the back of the controller. If the DataLink is used, turn off the
power using the power switch on the back of the device. If the AirFx air irrigator or AquaStim water irrigator is
used, verify the irrigator is in the standby state first, then switch off the irrigator from the power switch on the
back of the irrigator. If the observation camera for the Orion Auto-Traverse/Comprehensive chair is used,
turn off the observation monitor.
Turn off power sources
The USB hub should be disconnected from power by turning off the USB hub using the button on the hub, or
turning off the power source powering the USB hub.
This will remove power from the cameras when not in use. Isolation transformers should be turned off using
the power switch after any other devices have been powered off.
D-0134090-A – 2022/11
VisualEyes™ - Instructions for Use - EN
Page 98
Advertisement
Table of Contents
