Table of Contents
Advertisement
After clicking "BEGIN TESTING", the
software will open a test session
starting with the first test in the
selected protocol.
If a session was already created on
today's date with the same protocol for
the selected patient, the software will
continue from where the previous
session was left.
The test screen will present the
images from the cameras, a counter
presenting the duration of the test, as
well as test-specific graphs and
controls.
The left side panel contains buttons
for operator controls. The buttons in
the panel vary for each test. Some of
the most general controls are the
following:
t
Test menu: opens the session tree
allowing the operator to view the
current test session.
Home button: returns to the main
screen.
Up arrow: exits the current subtest
and goes to the individual subtest
summary screen.
Temporary settings: opes the
temporary settings for the specific test,
allowing the operator to change the
parameters temporarily.
Back and Next: go to the previous or
next test/subtest in the protocol test
list.
START: starts the selected test.
Timer: displays the time
remaining/elapsed based on the
selecting count style.
Add Time: adds 30 seconds to the
time remaining on the counter.
D-0134090-A – 2022/11
VisualEyes™ - Instructions for Use - EN
Page 80
Advertisement
Table of Contents
