Table of Contents
Advertisement
For SVV testing, the patient will use the SVV remote. This will rotate the SVV line by 0.1° counter clockwise
(left button) or clockwise (right button). The buttons can be held down as well to rotate the SVV line
incrementally until the button is released.
Figure 2.6-25: SVV remote for Orion Auto-Traverse/Comprehensive rotary chair
The observation camera for the Orion Auto-Traverse/Comprehensive chair is placed inside the chair
enclosure, and the monitor is placed near the operator. This allows the operator to monitor the patient inside
the booth via the observation monitor screen. The video from the observation camera is not recorded or
saved in the software.
Figure 2.6-26: Observation camera and monitor screen
Auto-Traverse and Comprehensive chair setup
The Orion Auto-Traverse/Comprehensive and the System 2000 Auto-Traverse/Comprehensive chairs have 3
main components: vestibular booth, rotary chair, and equipment cart. These systems are configured in the
same way except for a few variations. The pictorial representations for these two different chair setups are
shown below in
(Orion Auto-Traverse/Comprehensive) and
(System 2000
Figure 2.6-27
Figure 2.6-28
Auto-Traverse/Comprehensive).
D-0134090-A – 2022/11
VisualEyes™ - Instructions for Use - EN
Page 36
Advertisement
Table of Contents
