Table of Contents
Advertisement
3.4.2 Customized protocols
Protocols can be customized to the desired
settings of the operator.
The operator can generate a new protocol by
clicking "New Protocol" in the Protocol
Management menu.
When clicking "New Protocol", the operator
can choose to create a copy of the currently
selected protocol by clicking "Yes" in the
popup dialogue box, or choose to create a new
empty protocol by clicking "No".
Any protocol sequence can be customized by
the operator by adding or removing tests using
the buttons below the list of tests.
The order of the tests can also be altered by
clicking, and holding, on a test in the list and
dragging it to the desired position in the test
sequence.
Clicking "Edit Test" with a test selected will
open the test-specific settings.
The test-specific settings available are
dependent on the selected test, and include
the selection of different subtests to be
performed, duration, target settings, and
selection of graphs and values to be presented
in the results. For a detailed description of the
configuration options for each test, refer to
Additional Information.
D-0134090-A – 2022/11
VisualEyes™ - Instructions for Use - EN
Page 66
Advertisement
Table of Contents
