Table of Contents
Advertisement
Accessories
VORTEQ™ IMU (2nd generation)
Quick Description:
Technical Specifications:
Interface:
Velocity Range:
Sensitivity:
Dimensions (without cable) (L x W x H):
Weight (without cable):
Power:
DATALINK & ENG in Chair
Quick Description:
Technical Specifications:
Standards:
Interface:
Number of channels:
Dimensions (L x W x H):
Weight:
Internal Noise:
Input DC withstand:
Programmable Gains:
Common mode rejection:
Isolation mode rejection:
Impedance test:
Power:
D-0134090-A – 2022/11
VisualEyes™ - Instructions for Use - EN
Inertial Measurement Unit used to track head movement and position.
The VORTEQ™ IMU is used with both the VORTEQ™ Assessment and
VORTEQ™ Diagnostic modules, and is compatible with the side mount and
top mount goggles.
Wireless / USB 2.0
±500°/s
65.5 LSB/(°/s)
5.0 x 2.8 x 2.2 cm
0.02 kg
5 VDC supplied by PC USB
Amplifier used for EOG/ENG measurements.
Is available as the DataLink through the EOG Accessory kit for VNG or built
into the Orion Auto-Traverse / Orion Comprehensive chairs through the EOG
Accessory kit for Orion C/AT.
Applied Part Type: BF according to IEC 60601-1" "Protection class: Class II
accordint to IEC 60601-1
USB 2.0
2 or 3
25 x 29.5 x 5.1 cm
1.9 kg
<4 µV RMS inputs shorted, bandwidth DC-40 Hz
300 mW
1250, 2500, 5000, 10000
>100 dB measured at 10 Hz measured with 5k imbalance
>130 dB measured at 10 Hz
Impedance test circuit for individual electrodes up to 20 kΩ
110-220 VAC, 50-60 Hz, 1000W
Page 108
Advertisement
Table of Contents
