Table of Contents
Advertisement
Care and maintenance
How to clean the VisualEyes™ system
Before you clean:
Always switch off and disconnect from the power before you start cleaning
•
Do not allow liquid to enter the components of the VisualEyes™ system
•
Do not autoclave, sterilize or immerse the equipment or accessory in any fluid
•
Do not use hard or pointed objects to clean any part of the equipment or accessory
•
Cleaning procedure:
Recommended cleaning and disinfectant solutions
Lens cleaning cloth (microfiber), damp cloth, Sani-Cloth AF3 disinfectant wipes
NOTICE:
Please follow the instructions on the label of Sani-Cloth AF3 disinfectant wipes for
usage and disposal.
Procedure:
•
Video goggles and goggle straps should be cleaned with a Sani-Cloth AF3 disinfectant wipe
between patients
•
Goggle mirrors, camera lenses and IR coated mirrors must be cleaned regularly with microfiber
lens cleaning cloth to remove stains and dust and this helps to avoid shadows on the displayed
images
•
Side mounted camera goggles straps can be machine washed at 40°C using normal washing
detergents. Do not tumble dry. Please note that the elastic qualities may deteriorate after more
than 10 washing cycles, after which the straps should be replaced
•
Foam pads used in the side mounted camera goggles must be replaced after every single patient
to avoid cross infection. Refer to 2.6.1.1 to know how to replace these foam pads
•
The touch screen on PC can be cleaned by the microfiber lens cleaning cloth when the monitor is
turned off. If the touch screen needs further cleaning, use a Sani-Cloth AF3 disinfectant wipe to
clean the surface. Allow the cleaning solution to completely dry before turning on the computer
and monitor
•
All other external / exposed surface of the equipment and accessories can be regularly cleaned
with a soft damp cloth. This includes rotational chair, booth wall, projector, keyboard, mouse,
mouse pad, remote, emergency switch etc.
Warranty and service
Product warranty
Interacoustics warrants that:
•
The VisualEyes™ system is free from defects in material and workmanship under normal use and
service for a period of 24 months from the date of delivery by Interacoustics to the first
purchaser
•
Accessories are free from defects in material and workmanship under normal use and service for
a period of ninety (90) days from the date of delivery by Interacoustics to the first purchaser
If any component requires service during the applicable warranty period, the purchaser should
communicate directly to the local distributor to determine the appropriate repair facility. Repair or
replacement will be carried out at Interacoustics' expense, subject to the terms of this warranty. The
product requiring service should be returned promptly with proper packing, and postage prepaid. Loss or
damage in return shipment to Interacoustics shall be at purchaser's risk. In no event shall Interacoustics
be liable for any incidental, indirect or consequential damages in connection with the purchase or use of
any Interacoustics product. This shall apply solely to the original purchaser.
D-0134090-A – 2022/11
VisualEyes™ - Instructions for Use - EN
Page 99
Advertisement
Table of Contents
