Table of Contents
Advertisement
NOTE1 At 80 MHz and 800 MHz, the higher frequency range applies
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by
absorption and reflection from structures, objects and people.
a)
Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless) telephones
and land mobile radios, amateur radio, AM and FM radio broadcast and TV broadcast cannot be
predicted theoretically with accuracy. To assess the electromagnetic environment due to fixed RF
transmitters, an electromagnetic site survey should be considered. If the measured field strength in the
location in which the ORION is used exceeds the applicable RF compliance level above, the ORION
should be observed to verify normal operation. If abnormal performance is observed, additional
measures may be necessary, such as reorienting or relocating the ORION.
Over the frequency range 150 kHz to 80 MHz, field strengths should be less than 3 V/m.
b)
Return procedure
If the product is faulty or damaged in some way, it is important that you report this immediately to your
local distributor together with the invoice and serial number. If it is decided that it is necessary to return
the instrument to Interacoustics, you must fill out a detailed report of your concern. In the delivery box and
also at the end of this manual you will find a Return Report form, where you can describe the problem.
Please use the Return Report form
Please note that it is important that you provide as much relevant information as possible in the Return
Report regarding the problem in order to facilitate the task of the service engineer and ensure a
successful outcome.
This procedure should be complied with in all cases where an instrument is returned to Interacoustics.
D-0134090-A – 2022/11
VisualEyes™ - Instructions for Use - EN
Page 119
Advertisement
Table of Contents
