Table of Contents
Advertisement
Click the "Register" button to store the hardware in the system, and click "Next".
A new window for entering license keys will appear. Enter the license delivered with the system for the newly
registered hardware.
NOTICE Only the main VNG goggle and the EyeSeeCam goggle should hold licenses. These are the
licenses that are delivered with the VisualEyes™ system. For all other types of hardware (ENG in Chair /
DataLink / Pediatric Observation Camera / VORTEQ™ 2nd gen), the user should simply leave the license
entry empty, and click "Close". The hardware will then function using the same license as entered for the
VNG goggle.
After registering and licensing the VNG goggle, any additional hardware can be registered.
This can be done by restarting the software with the hardware connected, which will result in the pop-up
window stating that there is unknown hardware and it can then be registered following the steps described in
the procedure above.
Alternatively, the user can connect the new hardware and navigate to System Default Settings > Hardware
and Licenses. This presents an overview of all registered hardware along with the registered licenses. If
there is any unknown hardware, this will be presented in the top of the screen as well. The user can select
the type of hardware from the drop-down selection menu and click "Register".
D-0134090-A – 2022/11
VisualEyes™ - Instructions for Use - EN
Page 48
Advertisement
Table of Contents
