Lock Installation - Sargent ASSA ABLOY IN100 Series Installation Instructions Manual

IN100 Series
Cylindrical Lock
Installation Instructions
6

Lock Installation

1. Prepare door.
a. Verify hand and bevel of door. (Fig. 1)
NOTE: Stand on outside of locked
door when determining door hand.
b. Prepare door according to appropriate
template. (Fig. 2) See website
www.intelligentopenings.com
•
•
NOTE: Prior to installation, all holes must
be free of burrs, debris and sharp edges.
Raceway for Power
(Optional)
Cable Hole
Raceway for
Lockbody
Harness
Through-bolt Holes
A8189D • 800-810-WIRE (9473) • www.sargentlock.com
.
Field Template: A8149
(ships with product)
Door Manufacturer's Template:
4712
Outside
of Door
LH
Left Hand
Hinges Left
Open Inward
RH
Right Hand
Hinges Right
Open Inward
Through-bolt
Holes
External
DPS
holes
Lever Handle
Hole
Cylindrical
Pocket and
Latch
Holes
Pre-drilled
Tap Holes
Fig. 2
7
LHRB
Left Hand
Reverse Bevel
Hinges Left
Open Outward
Fig. 1
RHRB
Right Hand
Reverse Bevel
Hinges Right
Open Outward
Inside
of Door
Raceway for Power
(Optional)
Cable Hole
Raceway for
Lockbody
Harness
Through-bolt Holes