Lock Installation - Sargent IN220 Installation Instructions Manual

IN220 Mortise Lock

Lock Installation

6
1 Prepare Door
A. Verify Hand and Bevel of Door
Stand on outside of locked door when determining door hand.
LH
Left Hand
Hinges Left
Open Inward
B. Verify Product Label
C. Door Preparation
Prior to installation, all holes must be free of burrs, debris and sharp edges.
Prepare door according to appropriate template (see website www.intelligentopenings.com).
• Field Template: A8150 (ships with product)
• Door Manufacturer's Template: 4713
Cable Hole
Channel for Cat 5e
cable from hinge
Outside Cylinder Hole
(only with cylinder
installation)
Lever Holes
Fig. 1A
LHRB
Left Hand
Reverse Bevel
Hinges Left
Open Outward
Outside of Door
Through-bolt Hole
External DPS
Hole
(Not required for 8200)
Through-bolt Hole
Mortised
Pocket
Fig. 1B Wood Door Preparation
RH
Right Hand
Hinges Right
Open Inward
Inside of Door
1-800-810-WIRE • www.sargentlock.com • A8204B
RHRB
Right Hand
Reverse Bevel
Hinges Right
Open Outward
Cable Hole
Channel for Cat 5e
cable from hinge
Inside of Lock body
Wire Hole
Thumb Turn Hole
Lever Holes
11