Lock Busy Led Indications - Sargent ASSA ABLOY IN100 Series Installation Instructions Manual

11

Lock Busy LED Indications

Lock BUSY indicates lock is processing a card (such as a key configuration card for online SE processor or offline
void list card with many entries). Card should be kept in close proximity to reader until end of process. Lock BUSY
indication does not cancel or overwrite any other indications. Indications related to access permissions or setup
card processing are still present.
Indication scheme is described by figures below:
Card detected
Card detected
Card detected
Card presentation start*
Config card processed
Lock BUSY indication
1.5s
Lock BUSY indication Mixed with Scenario for Offline Audit Trail Card
1.5s
Card Lock BUSY
detected
indication
1.5s
Lock BUSY
indication
Online SE Keys Setup Card
1.5s
*Introduced with firmware version 3.8 - in prior firmware versions
only "Config card processed" LED indication is displayed.
20
1.5 second delay
Continuous yellow flash (.1s every 1 sec)
Audit trail card
with lock busy indication
Card
success
Online BLE Access
BLE access
BLE
success
Yellow flashes
(.1seconds every .9 seconds until read is completed)
A8189D • 800-810-WIRE (9473) • www.sargentlock.com
IN100 Series
Cylindrical Lock
Installation Instructions
Ten yellow flashes
(.125 seconds every .125 seconds)