Lock Installation - Sargent ASSA ABLOY IN Series Installation Instructions Manual

Lock Installation

8
1 Prepare Door
A. Verify Hand and Bevel of Door
Stand on outside of locked door when determining door hand.
LH
Left Hand
Hinges Left
Open Inward
B. Door Preparation
Prior to installation, all holes must be free of burrs, debris and sharp edges.
Prepare door according to appropriate template (see website ).
Field Template: A8149 (ships with product)
Door Manufacturer's Template: 4712
Raceway for
External Power
*
Channel for Cat5e
(or higher) cable
from hinge
Raceway for
Lockbody
Harness
Through-bolt
Hole
*See Section 7 - IN220 (PoE) Wiring and Installation
LHRB
Left Hand
Reverse Bevel
Hinges Left
Open Outward
Fig. 1A
Outside of Door
Through-bolt
Holes
External
DPS
holes
Lever Handle
Hole
Cylindrical
Pocket and
Latch Holes
Pre-drilled
Tap Holes
Fig. 1B Wood Door Preparation
12
IN120 / IN220 Cylindrical Lock
RH
Right Hand Right Hand
Hinges Right Reverse Bevel
Open Inward Hinges Right
Open Outward
Inside of Door
1-800-810-WIRE • www.sargentlock.com • A8152G
RHRB
Raceway for
External Power
*
Channel for Cat5e
(or higher) cable from
hinge
Raceway for
Lockbody
Harness
Through-bolt
Hole