Lock Installation - Sargent Profile Series Installation Instructions Manual

6

Lock Installation

1 Prepare Door
A. Verify Hand and Bevel of Door
Stand on outside of locked door when determining door hand.
LH
Left Hand
Hinges Left
Open Inward
B. Door Preparation
Prior to installation, all holes must be free of burrs, debris and sharp edges.
Prepare door according to appropriate template (see website www.intelligentopenings.com):
• Wood door: A7457 (ships with product)
• Metal door: Template 4533
Through-bolt Hole
Ribbon Cable Hole
(Controller to Keypad, if used)
Outside Cylinder Hole
(only with cylinder installation)
Lever Handle Hole
Through-bolt Hole
6 1-800-810-WIRE • www.sargentlock.com • A8078A
LHRB
Left Hand
Reverse Bevel
Hinges Left
Open Outward
Fig. 1A
Inside of Door
Outside of Door
Mortised
Pocket
Pre-drilled
and/or
Tapped Holes
Profile Series v.N2 Mortise Lock
RH
Right Hand Right Hand
Hinges Right Reverse Bevel
Open Inward Hinges Right
Open Outward
Through-bolt Hole
Ribbon Cable Hole
(Controller to Keypad)
Inside of Lockbody Wire Hole
Thumb Turn Lever Hole
Lever Handle Hole
Through-bolt Hole
Fig. 1B
RHRB