Control Bus Cable Location - GE FGC TLE Series Manual

40-150 kva/kw, 480 vac three phase highly efficient and scalable

Table of Contents

4.9.3 Control bus cable location

This installation must be verified by trained personnel before the initial start-up.

ENSURE THAT THE UPS INSTALLATION IS COMPLETELY POWERED DOWN.

Keep SELV cables separated from HIGH VOLTAGE cables.

Fig. 4.9.3-1 TLE Series 160 - 200 - 225 - 250

View electronic module on intermediate unit

Access to the control bus connection

The communication bus cable connectors are placed on the two boards "P13/P14 – IM0022 – Bus

Interface Board" (see Fig. 4.9.3-1 and 4.9.3-2).

Fig. 4.9.3-3 View electronic module on intermediate unit

Modifications reserved

GE_UPS_ISG_TLE_SUL_M16_M50_2bU_V010.docx

Critical Power

Fig. 4.9.3-2 TLE Series 300 - 400 - 500

View electronic module on intermediate unit

Control bus cables connection

Plug the cables J1A – J2A (1/2/3/4/5) and J1B –

J2B (1/2/3/4/5) on the connectors J1A – J2A and

J1B – J2B placed on the two boards "P13/P14 –

IM0022 – Bus Interface Board".

Fix the communication bus cables J1A – J2A

(1/2/3/4/5) and J1B – J2B (1/2/3/4/5) with the

provided cable clamps "A".

Installation Guide TLE Series 160 - 500 UL S2B

Table of Contents