GE FGC TLE Series Manual page 179

TLE Series UPS 160/200/225/250 Technical Datasheet
FRONT PANEL CONTROLS, SIGNALS & ALARMS
Mimic Diagram
Operation
Alarm
Warning LED
Load Level / Battery Run Time
Multilanguage Graphic LCD
Touch screen Push Buttons
OPTIONAL FEATURES
RPA
eBoost™ (Multi-Mode)
Dual Input
Input/Output Transformers
External Maintenance Bypass
Protection Software
SNMP Communication
6
Touch Screen Graphic Display
Represents operational status of the UPS on Home Page of LCD
Visual indicator when load is on inverter OR load is on bypass
BLINK during service check
Visual indicator and audible signal, activates approx. 3 minutes (adjustable) before complete and automatic
load shutdown due to the battery is fully discharged and the load cannot be transferred on utility or Over
temperature or overload condition (>125%) and the load cannot be transferred on utility.
Visual indicator and audible signal active when any alarm condition is present
BLINK when alarm is active and not acknowledged
Bar graph status indicator on Home Page of LCD
Load level in %, Battery run time in min.
Display of UPS metering functions , event history, configuration of parameters and helps perform critical
UPS Operations
Supports 14 Languages(Chinese, Czech, Dutch, English, Espanola, Francais, German, Italiano, Polish,
Portuguese, Russian, Slovensko, Soumi, Swedish)
Inverter On
-Redundant Parallel Operation
-High Efficiency Operating Mode for Single and Multi module applications
-Integral to UPS cabinet. No additional cabinet required
-Available in external cabinets for isolation or voltage transformation
-Available in external or as a part of output switchgear cabinet
-PC operated remote monitoring, control and diagnostics
-Ethernet interface for network connection
GECriticalPower.com
Inverter Off