Compliance With The European Weee Directive 2002/96/Ec; Compliance With The European Machinery Directive 2006/42/Ec 2Nd Edition - June 2010; Validating The Operation Of The Safe Torque Off Function; Compliance With The En 61800-3:2004 + A1:2012 - ABB ACH580-01 Hardware Manual
Hide thumbs
Also See for ACH580-01:
- Quick installation and start-up manual (412 pages) ,
- Hardware manual (396 pages) ,
- Installation, operation and maintenance manual (90 pages)
Table of Contents
Advertisement
304 Technical data
￭
Compliance with the European WEEE Directive 2002/96/EC
The WEEE Directive defines the regulated disposal and recycling of electric and electrical
equipment.
￭
Compliance with the European Machinery Directive 2006/42/EC
2nd Edition – June 2010
The drive is a machinery component that can be integrated into a wide range of
machinery categories as specified in European Commission's Guide to application of
the Machinery Directive 2006/42/EC 2nd Edition – June 2010. See chapter
torque off function (page
Validating the operation of the Safe torque off function
See chapter
The Safe torque off function (page
Compliance with the EN 61800-3:2004 + A1:2012
￭
Definitions
EMC stands for Electromagnetic Compatibility. It is the ability of electrical/electronic
equipment to operate without problems within an electromagnetic environment. Likewise,
the equipment must not disturb or interfere with any other product or system within its
locality.
First environment includes establishments connected to a low-voltage network which
supplies buildings used for domestic purposes.
Second environment includes establishments connected to a network not supplying
domestic premises.
Drive of category C1: drive of rated voltage less than 1000 V and intended for use in
the first environment.
Drive of category C2: drive of rated voltage less than 1000 V and intended to be installed
and started up only by a professional when used in the first environment.
Note: A professional is a person or organization having necessary skills in installing
and/or starting up power drive systems, including their EMC aspects.
Drive of category C3: drive of rated voltage less than 1000 V and intended for use in
the second environment and not intended for use in the first environment.
Drive of category C4: drive of rated voltage equal to or above 1000 V, or rated current
equal to or above 400 A, or intended for use in complex systems in the second
environment.
￭
Category C1
The emission limits are complied with the following provisions:
347).
347).
The Safe
Advertisement
Table of Contents
