Installing The Drive; Installing The Drive Vertically, Frames R1 - ABB ACH580-01 Hardware Manual

76 Mechanical installation

Installing the drive

￭
Installing the drive vertically, frames R1...R4
The figures show frame R3 as an example.
Select fasteners and their application to meet local requirements appropriate to wall
surface materials, drive weight and application.
1. Mark the hole locations using the mounting template included in the package. Do
not leave the mounting template under the drive. The drive dimensions and hole
locations are also shown in the drawings in chapter
2. Drill the mounting holes.
3. Insert anchors or plugs into the holes and start the bolts into the anchors or plugs.
a
1
a
b
Weight IP21
(UL Type 1)
Weight IP55
(UL Type 12)
2 R1...R2: M5 (#10)
R3...R4: M6 (¼ in)
×4
×4
R1 R2
mm in mm
98 3.86 98 3.86
317 12.48 417 16.42
kg lb kg
4.6 10.1 6.6 14.6
kg lb kg
4.8 10.6 6.8 15.0
Dimension drawings (page
3
R3
in mm in mm
160 6.30 160
473 18.62 619
lb kg lb kg
11.8 26.0 19.0
lb kg lb kg
13.0 28.7 20.0
309).
×4
R4 R4 v2
in mm in
6.30 160 6.30
24.37 619 24.37
lb kg lb
41.9 22.0 48.5
lb kg lb
44.1 23.0 50.7