Electrical installation – IEC
Contents of this chapter
This chapter describes how to:
•
measure the insulation
•
do the grounding system compatibility check
•
change the EMC filter or ground-to-phase varistor connection
•
connect the power and control cables
•
install optional modules
•
connect a PC.
Warnings
WARNING!
Obey the safety instructions of the drive. If you ignore them, injury or death,
or damage to the equipment can occur. If you are not a qualified electrical
professional, do not do installation, commissioning or maintenance work.
Required tools
To do the electrical installation, you need these tools:
•
wire stripper
•
screwdriver set (Torx, flat and/or Phillips, as appropriate)
•
torque wrench.
Electrical installation – IEC 113
6