Installing The Drive Vertically, Frame R5 - ABB ACH580-01 Hardware Manual

￭

Installing the drive vertically, frame R5

Select fasteners and their application to meet local requirements appropriate to wall
surface materials, drive weight and application.
1. Mark the hole locations using the mounting template included in the package. Do
not leave the mounting template under the drive. The drive dimensions and hole
Installing the drive vertically, frame
locations are also shown in the drawings in chapter
1. Mark the hole locations using the mounting template included in the package. Do
not leave the mounting template under the drive. The drive dimensions and hole
2. Drill the mounting holes.
locations are also shown in the drawings in chapter
227.
3. Insert fixing anchors or plugs into the holes. Start the two upper bolts and the two
2. Drill the mounting holes.
lowest bolts into the anchors or plugs.
3. Insert fixing anchors or plugs into the holes. Start the two upper bolts and the two
lowest bolts into the anchors or plugs.
1
c
Drive the bolts long enough into the wall to make them carry the weight of the
drive.
1
c
2
2
×6
×6
×2
×2
a
b
a
b
c
c
d >
d >
×2
e >
e >
×2
×2
×2
3
R5: M6 (¼ in)
3
×2
Mechanical installation 79
Mechanical installation 69
R5
Dimension drawings (page
Dimension drawings
R5 IP21 (UL Type 1)
mm in
R5 IP21 (UL Type 1) R5 IP55 (UL Type 12)
612 24.09
mm in mm
581 22.87
612 24.09 612
581 22.87 581
160 6.30
160 6.30 160
200 7.87
200 7.9 200
200 7.9 200
100 3.94
kg lb
R5 IP21 (UL Type 1) R5 IP55 (UL Type 12)
kg lb kg
28.3 62.4
28.3 62.4 28.6
×2
×2
×2
309).
on page
R5 IP55 (UL Type 12)
mm in
612 24.09
in
581 22.87
24.09
22.87
160 6.30
6.30
200 7.87
7.9
7.9
100 3.94
kg lb
lb
29.0 64.0
63.1