Ce Marking; Compliance With The European Low Voltage Directive; Compliance With The European Emc Directive; Compliance With The European Rohs Directive - ABB ACS880-37LC Hardware Manual

Standard
IEC 60204-1:2005 +
A1:2008
EN 60204-1:2006 +
AC:2010
IEC/EN 61439-1:2009
EMC performance
IEC/EN 61800-3:2004
Product requirements in North America
UL 508A 1st edition:2001
UL 50 12th edition:2007
CSA C22.2 No. 14-13:2013
CSA C22.2 No. 274-
13:2013

CE marking

A CE marking is attached to the product to signify that it conforms to the applicable European
Union legislation.
￭

Compliance with the European Low Voltage Directive

The compliance with the European Low Voltage Directive has been verified according to
appropriate European harmonized standards.
￭

Compliance with the European EMC Directive

The EMC Directive defines the requirements for immunity and emissions of electrical
equipment used within the European Union. The EMC product standard (EN 61800-3:2004)
covers requirements stated for drives. See also the separate section about the Compliance
with EN 61800-3.
￭

Compliance with the European RoHS Directive

The RoHS Directive defines the restriction of the use of certain hazardous substances in
electrical and electronic equipment.
￭

Compliance with the European WEEE Directive

The WEEE Directive defines the regulated disposal and recycling of electric and electrical
equipment.
￭

Compliance with the European Machinery Directive

The drive includes the Safe torque off function and can be equipped with other safety
functions for machinery which, as safety components, are in the scope of the Machinery
Directive. These functions of the drive comply with European harmonized standards such
as EN 61800-5-2.

Declaration of Conformity (According to Machinery Directive)

The Declaration of Conformity is delivered with the drive.
Information
Safety of machinery. Electrical equipment of machines. Part 1: General require-
ments.
Low-voltage switchgear and controlgear assemblies -- Part 1: General rules
Adjustable speed electrical power drive systems. Part 3: EMC requirements and
specific test methods
Industrial Control Panels
Enclosures for Electrical Equipment, Non-Environmental Considerations
Industrial control equipment
Adjustable speed drives
Technical data 159