Upc-A/Ean-13 With Extended Coupon Code - Honeywell Xenon XP 195 Series User Manual

Addenda Timeout
You can set a time during which the scanner looks for an addenda. If an addenda is
not found within this time period, the data can be either transmitted or discarded,
based on the setting you are using for
milliseconds) for this timeout by scanning the barcode below, then setting the
timeout (from 0-500 milliseconds) by scanning digits from the
Chart,
Note: The Addenda Timeout setting is applied to all addenda and coupon code searches.
UPC-A Addenda Separator
When this feature is On, there is a space between the data from the barcode and
the data from the addenda. When turned Off, there is no space. Default = On.

UPC-A/EAN-13 with Extended Coupon Code

Use the following codes to enable or disable UPC-A and EAN-13 with Extended
Coupon Code. When left on the default setting (Off), the scanner treats Coupon
Codes and Extended Coupon Codes as single barcodes.
If you scan the Allow Concatenation code, when the scanner sees the coupon
code and the extended coupon code in a single scan, it transmits both as one
symbologies. Otherwise, it transmits the first coupon code it reads.
Xenon XP User Guide
beginning on page 311 of this manual, then Save. Default = 120.
Addenda Timeout
* On
UPC-A Addenda Required. Set the length (in
* Not Required
Programming
Off
173