Menu Bar Elements; Toolbar Elements - Mitsubishi Electric NZ2GF-ETB User Manual

10.2.2

Menu bar elements

The following are the menu bar elements of the configuration tool.
New
Open
Save
Save As
Exit
Read
Write
Diagnostics
Monitor
Destination Setting
About
10.2.3

Toolbar elements

The following are the toolbar elements of the configuration tool.
Toolbar icon
Project
Creates a new project.
Opens a project file that has been saved to the local disk.
When a project is saved in the configuration tool of other languages, opening the file may cause garbled
characters.
Saves the current project file.
Saves the current project with a different file name.
The extension of the project file is ".eap".
Terminates the configuration tool.
Online
Reads parameters from the Ethernet adapter module.
Writes parameters to the Ethernet adapter module.
Performs diagnostics on the Ethernet adapter module.
Monitors the device/buffer memories in the Ethernet adapter module.
Specifies the IP address of the connected Ethernet adapter module.
Displays the version of the configuration tool.
Corresponding menus
[Project]  [New]
[Project]  [Open]
[Project]  [Save]
[Online]  [Write]
[Online]  [Read]
[Online]  [Diagnostics]
Help
Creates a new project.
Opens a project file that has been saved to the local disk.
Saves the current project file.
Writes parameters to the Ethernet adapter module.
Reads settings from the Ethernet adapter module.
Performs diagnostics on the Ethernet adapter module.
CHAPTER 10 CONFIGURATION TOOL
Reference
Page 200, Section 10.5.2
Page 200, Section 10.5.1
Page 203, Section 10.7
Page 201, Section 10.6
Page 199, Section 10.4
Description
10
187