Cc-Link Ie Field Network - Mitsubishi Electric NZ2GF-ETB User Manual

10.3.2

CC-Link IE Field Network

Configure the settings for connecting the Ethernet Adapter Module to CC-Link IE Field Network.
Setting item tree  NZ2GF-ETB  [Parameter]  "CC-Link IE Field Network"
The following table lists the setting items on the dialog box.
Item
Mode
Network No.
CC-Link IE
Field
Network
Station No.
CC-Link IE Field Network
Gateway Setting
190
Set the mode of the Ethernet Adapter Module.
Set the network number of the Ethernet Adapter Module.
Set the station number of the Ethernet Adapter Module.
Set the communication route of when the IP packet transfer function is used. (
Page 191, Section 10.3.2 (1))
Description Setting range
Online/Offline
(Default: Online)
1 to 239
(Default: None)
1 to 120
(Default: None)
