Mitsubishi Electric NZ2GF-ETB User Manual page 102

(c) Request destination module I/O No., request data length, monitoring timer,
command, and subcommand
The following values are stored for each item:
Setting item
Request destination module I/O No.
Request data length
Monitoring timer
Command
Subcommand
(d) Send data
The value stored in the buffer memory in the Ethernet adapter module is stored. ( Page 97, Section 7.2.5
(5) (h))
(2) Precautions when setting on-demand data
For the send data formats (binary code/ASCII code) of a message at the time of sending on-demand data, setting
locations differ between the subheader to the subcommand and the send data.
Protocol
Connection for users (TCP)
Auto-open UDP port
100
03FF
H
The data length from the monitoring timer to the send data is stored in 4-digit hexadecimal
format.
0000
H
2101
H
0000
H
Header Subheader
Subheader to subcommand
Setting in the configuration tool ( Page 195, Section
10.3.3 (2))
Setting in the buffer memory ( Page 94, Section 7.2.5 (4)
(b))
Setting value
Subcommand
Send data
Setting in the buffer memory (
Page 97, Section 7.2.5 (5) (h))
Send data