Power Supply Part - Mitsubishi Electric NZ2GF-ETB User Manual

2.1

Power Supply Part

Respective names of the Ethernet adapter module's power supply part are shown below.
No. Name
Indicates the operating status of the power supply part.
1) POWER LED • On (green): Normally operating.
• Off: No power input, power failure, or hardware failure
2) FG terminal A ground terminal connected to the shield pattern on the printed circuit board (M3.5 screws)
3) LG terminal A terminal grounded to a power filter (M3.5 screws)
Terminals for power input. (M3.5 screws)
Power input
4) For the specifications of the power supply to be connected, refer to "Performance specifications of each part."
terminal
( Page 31, Section 3.2.1 (1))
1)
2)
3)
4)
Part
CHAPTER 2 PART NAMES
23
2