Mitsubishi Electric NZ2GF-ETB User Manual page 76

3.
Click the [Network Configuration Settings] button to set the parameters as follows.
4.
After setting, click the [End] button.
5.
Click the [Refresh Parameters] button to open the refresh parameter setting window. Set the
parameters as follows.
6.
After setting, click the [End] button.
7.
In the network parameter setting window, click the [End] button.
8.
Write the set parameters to the CPU module on the master station.
[Online]  [Write to PLC]
9.
Reset the CPU module or power off and on the system.
74
RESET
or Power OFF ON