Mitsubishi Electric NZ2GF-ETB User Manual page 16

Term
Reserved station
Response message
Return
RIRD
RIWT
Routing
Slave station
SLMP
Transient transmission
14
A station reserved for future use. This station is not actually connected, but counted as a connected station
An SLMP message sent from an Ethernet adapter module to an external device
A process of restarting data link when a station recovers from an error
The abbreviation for JP.RIRD and GP.RIRD.
This dedicated instruction is used in programs of the master/local module.
The abbreviation for JP.RIWT and GP.RIWT.
This dedicated instruction is used in programs of the master/local module.
A process of selecting paths for communication with other networks.
CC-Link IE Field Network requires communication paths to be preset using routing parameters to
communicate with stations on different networks.
An Ethernet adapter module does not require routing parameters. Communications with other networks are
performed according to the routing parameters set to the master station.
A generic term for stations other than a master station: local station, remote I/O station, remote device
station, and intelligent device station
The abbreviation for Seamless Message Protocol.
This protocol is used to access an SLMP-compatible device or a programmable controller connected to an
SLMP-compatible device from an external device.
A function of communication with another station, which is used when requested by a dedicated instruction
or GX Works2
Description