Honeywell SYA14 Series Manual page 665

SPECIFICATIONS
Input
Nominal voltage
Nominal consumption
Output
Contact complement
Switching Capability
Current Range (min. to max.)
Voltage Range (min. to max.)
Switching Capability per AC15 (EN
Typical Electrical Life Expectancy
Typical Power Factor (cos ϕ)
Output contact fuse rating
General
Temperature range
Housing material
Vibration resistance
Wire/conductor connection
Wire/conductor attachment
NOTE 1: Install
suppressor devices across
load to avoid module
contact arcing and ensure
specified relay
expectancy.
NOTE 2: Total operations =
operations at power factor 1
multiplied by the limitation
factor. If the power factor is
0.5 at 230 Vac,
(1,000,000 operations), the
limitation factor is 0.70.
1,000,000 x 0.70 = 700,000
total operations.
2
Contact type
Response time
Start time
60947-5-1)
2A
3A
4A
0.3
0.5
0.7
1.0
Mechanical life
Sealing
1 x 2.5 mm
Removable terminal strips with M 3,5 screws; wire contacts are
Mounting Quick install rail mounting EN 50022-35, width:35 mm (1.38 in.)
Weight
FIG 1. CONTACT LIFE FOR 100%
arc RESISTIVE LOAD (TYPICAL) (NOTE 1)
power factor = 1 (cos ϕ)
life
2A
24 VDC (-10%, +10%)
Three NO contacts, one NC contact
Safety relay, positive-guided
Opening in supply circuit (A1(+)/A2(-)): 35ms
Manual/automatic START function: 100ms
Power factor = 1 with resistive load
10 mA to 4 A
10 to 250 VAC/DC
NO contact: 3 A / 250 V
NC contact: 2 A / 250 V
Power factor = 1 at 230 VAC/DC (see fig. 1, note 1)
1,000,000 operations
500,000 operations
300,000 operations
Limitation Factor (see fig. 2, note 2)
Time delay 4 A (max.)
Ten million switching operations
-15°C to + 55°C (5°F to 131°F) at 90% humidity (max.)
Housing IP 40 Terminals IP 20
Thermoplastic
Amplitude 0.35 mm; Frequency 10 to 55 Hz
2
solid (max.) [14 AWG] or 2 x 1.5 mm
stranded wire with sleeve DIN 46288
enclosed to prevent electrical shock
210 g (0.46 lb.)
switching power [kVA]
107015-10 EN FR26 GLO 1198 Printed in Germany
1.2 W
0.45
0.70
0.85
1.00
2
(max.) [16 AWG]
FIG 2. LIMITATION FACTOR FOR
INDUCTIVE LOADS (note 2)
power factor < 1 (cos ϕ)