Honeywell SYA14 Series Manual page 551

Only the packaging and the documentation of FF-SRM Series
CE
product carry the CE mark; the CE declaration of conformity is
at the back of this manual
Institut National de Recherche et de Sécurité (French body notified
INRS
for the CE certification of Electrosensitive protective Equipment)
The Canadian Standard Association has been accredited as a
cCSAus
Nationally Recognized Testing Laboratory (NRTL) by the US
Occupational Safety and Health Administration (OSHA). The CSA is
able to carry out tests according to the Canadian and UL standards
and delivers a single certificate which is valid for both Canada and
the United States.
2.4 Operation
2.4.1 Selection of the appropriate mode (switch ST1)
FACTORY SETTINGS
•
The muting module is set in the conveyor mode on delivery. The muting module can
be used with this mode of operation on machines where the protective equipment
controls the access across a conveyor belt.
•
Select the press mode on machines where the operator carries out manual
operations during non dangerous phases of the machine working cycle.
The selection of modes is done with 2 switches ST1 located inside the module. The
removal of the upper terminal strip eases access to the switches ST1 :
Figure 2.2 : Selection of modes of operation
ST1-1 ST1-2
OFF* OFF*
ON ON
(*) : position of switches on delivery
107004-15 EN FR26 ROW 0899 Printed in France
*
ST1
27 26 25 24 23 22 21 2
+ - + -
RESTART OSD 1
SM 1 EM 1
ST3
FF - SRM
RESET
ATUS SM 2 EM 2
RESTART OSD 2
STATUS + - + - +
6 7 8 9 10 11 12 1
ST1
ST2
Position of switches in
the conveyor mode :
ST1-2 (background)
ST1-1 (foreground)
17