Assa Abloy Sargent Harmony Series Installation Instructions Manual page 14

8 Outside Lever and Inside Adapter Plate Assembly Installation
1. With outside lever horizontal, insert the mounting post through outside of door and lock body.
Make certain the lever spindle is properly engaged inside the lock body (Fig. 8A).
2. On the inside of the door, insert slotted spindle into square hole of mortise lock (Fig. 8B),
with spindle slot directed away from the lock body, and aligned with the set screw hole in
the inside adapter.
3. Slide inside adapter and plate assembly over spindle and loosely secure with (2) 8-32 X 5/8"
Phillips oval head and lock washer machine screws.
NOTE: Ensure that position of set screw hole and spinsdle slot are oriented to match location
of hole in the inside lever handle.
4. Securely tighten the lock body screws.
Outside of
Door
Harmony Series H2 Mortise Lock
Mortise
Lock body
Screws
Fig. 8A
14 A8027G • 800-810-WIRE (9473) • www.sargentlock.com
Inside of
Door
(2)8-32 X 5/8"
Phillips Oval
Head and
Lock Washer
Machine
Screws
Slotted
Spindle
Fig. 8B