Table of Contents
Advertisement
Harmony Series H2 Mortise Lock
Installation Instructions
7
1 Door Preparation
A. Verify Hand and Bevel of Door
Stand on outside of locked door when determining door hand.
Left Hand
Hinges Left.
Open Inward.
B. Door Preparation
Prepare door according to appropriate template. If necessary, refer to website:
www.intelligentopenings.com.
•
Prior to installation, make sure all holes are free of burrs, debris, and sharp edges.
•
If doors are not properly reinforced per ANSI 115.2, commercially available reinforcements
should be installed.
•
Templates:
•
Field prep: A7944 template ships with product.
•
Manufacturer: 4590 wood and metal door template.
Through-bolt Holes
(2 places)
Raceway for 12 Conductor
Network/Power Cable
(ElectroLynx) from McKinney
Outside Cylinder Hole
(70/71, 80/81
functions only)
Lever Handle Hole
A8027G • 800-810-WIRE (9473) • www.sargentlock.com
Left Hand
Reverse Bevel
Hinges Left.
"LH"
Open Outward.
"LHRB"
Outside of Door
Pre-drilled and/or
Tapped Holes (2 Places)
Right Hand
Hinges Right.
Open Inward.
"RH"
Fig. 1A
Inside of Door
Wood Door
Mortise
Area
Fig. 1B
9
Right Hand
Reverse Bevel
Hinges Right.
Open Outward.
"RHRB"
Raceway for 12 Conductor
Network/Power Cable
(ElectroLynx) from McKinney
Hole for Cable from
Reader to Controller Board
Pre-drilled and/or
Tapped Holes (2 places)
Inside Cylinder Hole
Thumb Turn Hole
Lever Handle Hole
Advertisement
Table of Contents
