5 Outside Escutcheon and Inside Mounting Plate Installation (Continued)
2. Feed the reader cable located on the back of the outside
escutcheon through the door prep (Fig. 5B).
3. Outside gasket must be used when installing Harmony in an
outdoor application (Fig. 5B).
4. Secure the mounting plate to the outside escutcheon with
(2) #8-32 x 2" flat head machine screws (Fig. 5C).
Outside of Door
Gasket required
for exterior door
applications
Reader Cable
6 Install Inside Gasket (if necessary)
Remember to install inside gasket when
lock is being used in an outdoor application.
1. Add gasket (if necessary):
Gasket fits snug around plate at top and sides,
leaving room for the hole at the bottom.
2. Remove (peel) backing and place gasket
on door (Fig. 6).
Fig. 5B
Harmony Series H2 Mortise Lock
Fig. 6
12
A8027G • 800-810-WIRE (9473) • www.sargentlock.com
Inside of Door
Fig. 5C
Inside of Door
Required for exterior
door applications.