Assa Abloy Sargent Harmony Series Installation Instructions Manual page 18

12 Inside Rose and Inside Lever Assembly Instructions
1. Rotate the inside rose - first counter clock
wise to seat the threads and then, clockwise
to securely tighten.
2. Slide lever handle onto spindle until fully
seated. Be sure handle is horizontal and
facing the hinge side of the door. Push lever
onto spindle so minimum gap is visible.
3. Tighten the set screw securely with
a 1/8" hex wrench.
4. Before closing the door, test that
lever is functional and ensure
smooth operation of the
latchbolt and deadbolt.
13 Attach Front Plate
1. Attach front plate with (2) 8-32x1/4" flat head screws
and tighten securely.
Outside of Door
Fig. 13
Lock Body Screw
18
Harmony Series H2 Mortise Lock
Inside of Door
Spindle
Rose
Set Screw
Inside Lever
Fig. 12A
Lock Body Screw
(2) 8-32x1/4"
Flat Head Screws
IMPORTANT NOTE:
IDP Function requires use of IDP Strike, IDP Mortise
Lock Front for proper operation.
A8027G • 800-810-WIRE (9473) • www.sargentlock.com
Fig. 12B