NEC mPD780973 Series Preliminary User's Manual page 285

8-bit single-chip microcontrollers
Table of Contents

Advertisement

A.3.1 Hardware (2/2)
(2) When using in-circuit emulator IE-78001-R-A
Note
IE-78001-R-A
In-circuit Emulator
IE-70000-98-IF-B or IE-70000-98-IF-C
Interface Adapter
IE-70000-PC-IF-B or IE-70000-PC-IF-C
Interface Adapter
IE-78000-R-SV3
Interface Adapter
Note
IE-78K0-SL-EM
CPU Core Board
IE-780974-SL-EM1
Probe Board
EP-80GF-SL
Emulation Probe
TGF-080RAP
Conversion Adapter
(See Figure A-2)
Note Under development
Remarks 1. TGF-080RAP is a product of TOKYO ELETECH Corporation.
For inquiry: DAIMARU KOUGYOU Corporation
Phone: +81-3-3820-7112 Tokyo Electronic Components Division
+81-6-244-6672 Osaka Electronic Components Division
2. The TGF-080RAP is sold in single units.
APPENDIX A DEVELOPMENT TOOLS
This in-circuit emulator is used to debug hardware and software when developing
application systems using the 78K/0 Series. It supports the integrated debugger
(ID78K0). This emulator is used in combination with an emulation probe and an
interface adapter for connection to a host machine.
Note
This adapter is required when using the PC-9800 Series computer (except notebook
type) as the IE-78001-R-A host machine.
Note
This adapter is required when using an IBM PC/AT or compatible as the IE-78001-R-A
host machine.
This is an adapter and cable when an EWS is used as the host machine for the IE-
78001-R-A and is connected to the board in the IE-78001-R-A.
10Base-5 is supported as Ethernet
available conversion adapter is necessary.
This board is used to emulate a 78K/0 Series CPU.
This board is used in combination with an in-circuit emulator and probe board.
This board is used to perform mask option settings and pin connection changes.
This probe is used to connect an in-circuit emulator and target system.
It is for 80-pin plastic QFPs (GF-3B9 type).
An 80-pin conversion socket (TGF-080RAP) is included to facilitate target system
development.
This conversion adapter is used to connect a target system board designed to allow
mounting of an 80-pin plastic QFP (GF-3B9 type) and the EP-80GF-SL.
TM
. For the other methods, a commercially
285

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mpd780973aMpd780974

Table of Contents