Juniper EX9253 Hardware Manual page 116

10. (Optional) Configure the static routes to remote subnets with access to the management port.
Access to the management port is limited to the local subnet. To access the management port from
a remote subnet, you must add a static route to that subnet within the routing table.
[edit]
root@# set routing-options static route
readvertise
11. Configure the Telnet service.
[edit]
root@# set system services telnet
12. (Optional) Display the configuration to verify that it is correct.
[edit]
root@# show
system {
host-name ;
host-name
domain-name domain-name ;
backup-router
root-authentication {
authentication-method ( password | public-key );
}
name-server {
address ;
}
}
interfaces {
fxp0 {
unit 0 {
family inet {
address
}
}
}
}
13. (Optional) Configure additional properties by adding the necessary configuration statements.
remote-subnet next-hop destination-IP retain no-
address ;
address/prefix-length ;
107