Juniper EX9253 Hardware Manual page 115

6. Configure the IP address and prefix length for the switch's management Ethernet interface.
[edit]
root@# set interfaces fxp0 unit 0 family inet address
7. Configure the IP address of a backup router, which is used only when the routing protocol is not
running.
[edit]
root@# set system backup-router
8. Configure the IP address of a Domain Name System (DNS) server.
[edit]
root@# set system name-server
9. Set the root authentication password by entering either a plain-text password, an encrypted
password, or an SSH public key string (DSA or RSA).
[edit]
root@# set system root-authentication plain-text-password
password
New password:
Retype new password:
or
[edit]
root@# set system root-authentication encrypted-password
or
[edit]
root@# set system root-authentication ssh-dsa
or
[edit]
root@# set system root-authentication ssh-rsa
address
address
password
address/prefix-length
encrypted-password
public-key
public-key
106