Juniper EX9253 Hardware Manual page 177

Table 34: show chassis environment Output Fields
Field Name Field Description
Status
Status of the specified chassis component. For example, if
can be:
• OK
• Testing
• Failed
• Absent
Measurement
Depends on the Class. For example, if
Celsius (°C) and degrees Fahrenheit (°F). If the
2. Issue the command
show chassis temperature-thresholds
threshold settings. Following is a sample output on an EX9208 switch. The output is similar on other
EX Series switches.
show chassis temperature-thresholds (EX9208 Switch)
user@ host> show chassis temperature-thresholds
Fan speed
(degrees C)
Item Normal High
Chassis default 48
Routing Engine 0 70
FPC 3 55
FPC 5 55
Table 35 on page 169
Output fields are listed in the approximate order in which they appear.
: The fans are operational.
: The fans are being tested during initial power-on.
: The fans have failed or the fans are not spinning.
: The fan tray is not installed.
Yellow alarm
(degrees C)
Normal Bad fan
54 65 55
80 95 95
60 75 65
60 75 65
lists the output fields for the show chassis temperature-thresholds command.
(Continued)
Class
Class Temp
is , indicates the temperature in degrees
Class Fans
is , indicates actual fan RPM.
. This command displays the chassis temperature
Red alarm Fire Shutdown
(degrees C) (degrees C)
Normal Bad fan Normal
80 65 100
110 110 112
105 80 110
90 80 95
Fans
is , the fan status
168