Factory Defaults; Custom Defaults; Inquire Product Information - Newland NLS-HR3290 User Manual

Enter Setup

Factory Defaults

Scanning the following barcode can restore the scanner to the factory defaults. See Appendix 1:
Factory Defaults Table for more information.
Note: Use this feature with discretion.

Custom Defaults

Custom defaults make it possible to save the frequently-used settings on the scanner.
Scanning the Save as Custom Defaults barcode can save the current settings as custom defaults. Once
custom default settings are stored, they can be recovered at any time by scanning the Restore All
Custom Defaults barcode.
Custom defaults are stored in the non-volatile memory. Restoring the scanner to the factory defaults will
not remove the custom defaults from the scanner.
Save as Custom Defaults

Inquire Product Information

You can scan the barcode below to inquire the scanner information (such as firmware version, model
number, serial
** Exit Setup
Restore All Factory Defaults
number, manufacture
Inquire Product Information
Restore All Custom Defaults
date). The result will be sent to the Host.
12