Chapter 1 Getting Started; Introduction; About This Guide; Unpacking - Newland NLS-HR3290 User Manual

Introduction

The HR3290 hand-held barcode scanner (the "HR3290"), armed with the world-leading Newland
patented , a computerized image recognition system-on-chip, bring about a new era of 2D barcode
scanner.
The HR3290's 2D barcode decoder chip ingeniously blends
& manufacturing, which significantly simplifies application design and delivers superior performance and
solid reliability with low power consumption.
The HR3290 supports all mainstream 1D and standard 2D barcode symbologies (e.g., PDF417, QR
Code M1/M2/Micro and Data Matrix) as well as GS1-DataBar
versions). It can read barcodes on virtually any medium - paper, plastic card, mobile phones and LCD
displays.

About This Guide

This guide provides programming instructions for the HR3290. Users can configure the HR3290 by
scanning the programming barcodes included in this manual.
The HR3290 has been properly configured for most applications and can be put into use without further
configuration. Users may check the Factory Defaults Table in Appendix for reference. Throughout the
manual, asterisks (**) indicate factory default values.

Unpacking

Open the package and take out the scanner and its accessories. Check to make sure everything on the
packing list is present and intact. If any contents are damaged or missing, please keep the original
package and contact your dealer immediately for after-sales service.
1

Chapter 1 Getting Started

Enter Setup
technology and advanced chip design
TM
(RSS) (Limited/Stacked/Expanded
** Exit Setup