Ean-13 Beginning With 290 Add-On Code Required; Ean-13 Beginning With 378/379 Add-On Code Required - Newland NLS-HR3290 User Manual

EAN-13 Beginning with 290 Add-On Code Required

This setting programs the scanner to require an add-on code (2-digit or 5-digit) on EAN-13 barcodes that
begin with "290". The following settings can be programmed:
Require Add-On Code: All EAN-13 barcodes that begin with "290" must have a 2-digit or 5-digit add-on
code. The EAN-13 barcode with the add-on code is then transmitted. If the required add-on code is not
found, the EAN-13 barcode is discarded.
Do Not Require Add-On Code: If you have selected Require Add-On Code, and you want to disable
this feature, scan Do Not Require Add-On Code. EAN-13 barcodes are handled, depending on your
selection for the "Add-On Code Required" feature.
** Do Not Require Add-On Code

EAN-13 Beginning with 378/379 Add-On Code Required

This setting programs the scanner to require an add-on code (2-digit or 5-digit) on EAN-13 barcodes that
begin with a "378" or "379". The following settings can be programmed:
Require Add-On Code: All EAN-13 barcodes that begin with a "378" or "379" must have a 2-digit or
5-digit add-on code. The EAN-13 barcode with the add-on code is then transmitted. If the required add-on
code is not found, the EAN-13 barcode is discarded.
Do Not Require Add-On Code: If you have selected Require Add-On Code, and you want to disable
this feature, scan Do Not Require Add-On Code. EAN-13 barcodes are handled, depending on your
selection for the "Add-On Code Required" feature.
** Do Not Require Add-On Code
69
Enter Setup
Require Add-On Code
Require Add-On Code
** Exit Setup