Revision History - Newland NLS-HR3290 User Manual

Revision History

Version
V1.0.0 Initial release.
1. Added the Specify Decoding Area (Top, Bottom, Left, Right)
feature in Chapter 4.
2. Added the IBM SurePOS (Tabletop) and IBM SurePOS
(Handheld) features in Chapter 2.
3. Changed the range of Decode Session Timeout to 100ms -
3,600,000ms in Chapter 3.
4. Added the EAN-13 Beginning with 290 Add-On Code Required,
EAN-13 Beginning with 378/379 Add-On Code Required, EAN-13
Beginning with 414/419 Add-On Code Required, EAN-13
Beginning with 434/439 Add-On Code Required, EAN-13
Beginning with 977 Add-On Code Required, EAN-13 Beginning
V1.0.1
with 978 Add-On Code Required, EAN-13 Beginning with 979
Add-On Code Required, Febraban & Transmit Delay, Code 32
(Italian Pharma Code), Code 32 Prefix, Transmit Code 32 Check
Digit and Transmit Code 32 Start/Stop Character features in
Chapter 8.
5. Added Chapter 10 Data Formatter and Chapter 11 Batch
Programming.
6. Changed the default settings of the following parameter to:
Auto Sleep in Manual mode
Note: Firmware version V1.04.056 or later is required for the new
feature 1; firmware version V1.04.065 or later is required for the new
features 2-6.
Added the BA command (Replace a string with another) in Chapter 10.
V1.0.2
Note: Firmware version V1.04.070 or later is required for the new
feature above.
1. The maximum lengths for raw data (input data) and output data
supported by the Data Formatter are 3K bytes.
V1.0.3 2. Added the Multiple Data Formats feature in Chapter 10.
Note: firmware version V1.04.082 or later is required for the new
features above.
Updated the "Dimensions (unit: mm)" section in Chapter 1.
V1.0.4
V1.0.5 Deleted PS/2 related content.
Description
Disabled
Date
April 25, 2015
August 31, 2016
June 23, 2017
September 11, 2017
October 31, 2017
June 22, 2018